 Quest 2135
Microwave/PIR Motion Detector  
 35' x 35' coverage 
Pet-X (Pet Exclusion Technology) provides true
pet immunity
against multiple animals up to an 100 lb. dog
Rejects repetitive motion such as fans
Vertical and horizontal pattern adjustment
Microwave & PIR supervision
Range/sensitivity adjustment
6 year over-the-counter warranty
Lookdown zone
Advanced temperature compensation
The ASC Edge:
PET-X: Pet Exclusion Technology
Pet Exclusion Technology, or PET-X, enables the Quest 2135 to identify human intruders
and exclude multiple pets and other animals up to a single 100 lb. dog. This technology
correlates data from the microwave channel with data collected in the PIR channel through
a uniquely-designed optical system. Even crawling intruders are detected, while dogs
walking through the same portion of the pattern are ignored.
To take full advantage of PET-X, the following guidelines should be followed:
Mount the detector at 61/2' (2m) and
adjust the PIR angle properly
Set the PIR sensitivity for Standard (STD)
Mount where the animals can not come within
6" (1.8m) of the detector
Don't aim the detector at stairways the animal
can climb on
Adjust the microwave range coverage for the
minimum acceptable coverage for the room in which the detector is installed. Never install
with the microwave range exceeding 35' (10.7m)
Quest 2135 Specifications:
| Detection Method |
Dual Technology Microwave/PIR |
| Coverage |
35' x 35' (10.5m x 10.5m) |
| Detection Pattern |
PIR: 26 Zones (13 main, 13 close)
Microwave: Volumetric coverage |
| Pulse Count |
Installer Selectable, STD (standard) or INT (Intermediate) |
| Mounting |
6.5' (2m) for optimal pet exclusion |
| Detectable Walk Rate |
0.5-5ft/sec (0.15-1.5m/sec) |
| Indicators |
Single Tri-color LED
Alarm: Red
Microwave: Yellow
PIR: Green
Supervision Failure: Flashing Red
(4 pulse sequence) |
| Alarm Relay |
Form A, N.C. with 4.75 (ohms), 1/2W protective resistor, 0.125A max.
at 28VDC |
| Input Voltage |
9-15VDC |
| Current |
16mA DC nominal (up to 48mA DC during walk testing or trouble conditions) |
| Operating Temperature |
-40 to 120ºF (-40 to 49ºC) |
| Operating Humidity |
Up to 95% RH (max.), non condensing |
| Dimensions |
2.8"W X 5"H x 2.2"D
(71mm x 127mm x 56mm) |
Accessories:
QuestSB2: Swivel mount bracket
How to Order:
Quest2135--PIR/Microwave motion detector
QuestSB2--Swivel mount bracket
|
