 5890
Wireless PIR Motion Detector  
  40' x 56' coverage
Wireless operation for fast installation
For use with Q.E.D. control panels only
Tampered cover--unit transmits if cover removed
Up to 5 year battery life
The ASC Edge:
Unique Point ID
Every Ademco Wireless Sensor contains a serial number that is as distinctive as a
fingerprint--over one million different serial numbers are possible. This unique
"fingerprint" serves two purposes:
1. The location of an intruder within the area protected by an alarm
system can be identified at both the control panel and the central station.
2. Wireless signals easily penetrate walls and can travel over a hundred
feet. Neighboring installations, which may use similar wireless systems, can receive these
signals as well as the desired receiver. However, due to the uniqueness of each Point ID,
it is virtually impossible for any peripheral in the neighboring system to have the same
serial number.
5890 Specifications:
| Detection Method |
Passive infrared |
| Coverage |
Standard Lens 40' x 56' (12m x 17m)
199LR Lens 60' x 6' (18m x 1.8m)
199PA Lens 40' x 60' (12m x 18m) |
| Detection Pattern |
18 zones, (9 long, 5 intermediate, 4 short range) (standard lens) |
| Pulse Count |
Installer-selectable, 1- or 2-event |
| Detectable Walk Rate |
0.5-5 ft/sec (.15-1.5m/sec) |
| Mounting |
7' (2.1m), nominal |
| Indicators |
Red LED with enable/disable link |
| Input Voltage |
Two 3V Lithium batteries--use only Ademco No. 466, Duracel DL123A,
Panasonic CR123A, or Sanyo CR123A |
| Operating Temp |
32º to 122ºF (0ºC to 50ºC) |
| Operating Humidity |
Up to 95% RH (max.), non-condensing |
| Dimensions |
211/16" W x 43/4" H x 17/8"
D
(68mm x 120mm x 48mm) |
Accessories:
466: 3V Lithium replacement battery (2 required per unit)
199PA: Pet alley lens
199LR: Long range lens
How to Order:
5890--Wireless PIR Motion Detector. Includes two 3V lithium batteries and
masking labels for standard lens
466--3V Lithium replacement battery (2 required per unit)
199PA--Pet alley lens
199LR--Long range lens
|
