 997
Ceiling Mount PIR Motion Detector  
 360º look down capability 
8'-12' mounting height
Twist-off cover for easy removal
Locally & remotely controllable walk test
LED
SMD technology
6 year over-the-counter warranty
The ASC Edge:
Automated SMD Construction on the Flex Lines
Ademco has been a pioneer in the use of Surface Mount Device (SMD) construction in the
security industry. Starting with surface mount passive components like resistors and
capacitors, then moving to integrated circuits like amplifiers, now even sophisticated
microprocessors are surface mounted on Ademco's Flexible Manufacturing Lines. All Ademco
motion detectors, fabricated using automated SMD construction, provide you and your
customers with major benefits:
1. Higher Reliability: Each component is located precisely by robotic
cameras and each solder connection is carefully controlled by computer.
2. Fewer "out-of-the-box" problems: Because the components are
automatically selected and placed properly on the PCB, there is virtually no opportunity
for error in the fabrication process.
3. Improved RF Immunity: SMD components have no leads that could act as
miniature antennas where absorbing even a minute amount of RF energy can lead to false
alarms in high gain circuits such as PIR motion detectors.
997 Specifications:
| Detection Method |
Passive infrared |
| Coverage |
23' (7m) diameter @ 8' (2.4m) height
11.5' (3.5m) radius
36' (11m) diameter @ 12' (3.7m) height,
18' (5.5m) radius |
| Detection Pattern |
30 zones (12 outer, 12 middle, 6 inner, 1 center) |
| Pulse Count |
Installer-selectable, 1- or 2-event |
| Detectable Walk Rate |
0.5-5 ft/sec (.15-1.5m/sec) |
| Mounting |
12' (3.7m) maximum |
| Indicators |
Red LED with enable/disable feature |
| Alarm Relay |
Form A, N.C., 0.5A max. contact rating @ 30VDC. Reed relay, 15 ohm
protective resistor |
| Input Voltage |
12VDC nominal (voltage reversal makes PIR inoperative) |
| Current |
17 mA |
| Operating Temp |
32º to 122ºF (0º to 50ºC) |
| Operating Humidity |
Up to 95% RH (max.), non-condensing |
| Dimensions |
31/2"diameter x 1"high
(89mm diameter x 25.4mm high) |
|
